Crystal Flex
Crystal Flex ist ein SBC-Typ von 3D-Drucker-Filament, das Formbarkeit, Zähigkeit und Klarheit bietet
into ist ein halbflexibles Hochleistungsfilament für den 3D-Drucker.
Crystal Flex (Styrol-Butadien-Copolymer) bietet Formbarkeit, Zähigkeit und Klarheit in
hochleistungsfähiges halbflexibles 3D-Drucker-Filament. Crystal Flex erfüllt die Spezifikationen der
FDA Food Packaging Regulation 21 CFR 177.1640 der Vereinigten Staaten und erfüllt die Entflammbarkeitsnormen UL 94 HB.
Haupt Merkmale
-
Ausgezeichnete Klarheit
-
-
Semi-biegsam und belastbar
-
-
Lebensmittelkontakt akzeptabel
-
UL 94 HB Entflammbarkeitsklasse
-
Kompatibel mit Helios-Unterstützung für komplexen 3D-Multiextrusionsdruck
Applications
-
Fit testing
-
Lighting
-
Bottles, boxes, containers and (blister) packaging
-
End-use parts
-
Medical and lab equipment
General printing guidelines *
| Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Experience level: Beginner / Intermediate |
| Print temp: ± 230 - 260° C |
Fan speed: 0-30% |
|
| Heat bed: ± 80 - 100° C |
Enclosure needed: No |
|
*) Above displayed settings are meant as guidance to find your optimal print settings.
These ranges in settings should work for most printers, but please do feel free to experiment
outside these ranges if you think it is suitable for your printer. There is a lot of different type of
printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 101 g/cc |
50 gr coil |
0.5 Kg spool |
|
|
|
| Ø 1.75mm |
± 20.6m |
± 206m |
|
|
|
| Ø 2.85mm |
± 7.8m |
± 78m |
|
|
|
Product export information
| HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant with the below-listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present
standard of knowledge and may be amended if new cognitions are available and applies only for
the above-described products.
