Centaur PP
Centaur PP ist ein leichtes und leistungsstarkes 3D-Druckerfilament aus Polypropylen.
Centaur PP 3D druckt mit einer hervorragenden Zwischenschichthaftung und zeichnet sich
durch hervorragende mechanische Eigenschaften aus.
Centaur PP ist ein leichtes und leistungsstarkes Polypropylen (PP)-Filament, das entwickelt wurde
hervorragende mechanische Eigenschaften und eine hervorragende Zwischenschichthaftung aufweisen. Zentaur PP
kombiniert einzigartige Materialeigenschaften in einem 3D-Drucker-Filament, das Centaur PP
ein äußerst vielfältiges und multifunktionales Material, das für zahlreiche Anwendungen geeignet ist, von
3D-Druck von spülmaschinenfesten und mikrowellengeeigneten Haushaltsartikeln bis hin zu funktionalem Engineering
Objekte mit großen Ausdauereigenschaften.
Einzigartige Merkmale
-
Lebensmittelkontaktkonforme natürliche Variante
-
Spülmaschinenfest und mikrowellengeeignet
-
leicht
-
-
Wasserdichter Druck mit nur einwandigen Drucken möglich
-
Große elastische Eigenschaften
-
Verbesserte Verschleiß-, Abrieb- und Ermüdungsbeständigkeit
-
hohe chemische Beständigkeit
-
Ausgezeichnete Zwischenschichthaftung
-
Ausgezeichnete Haftung auf Eurocel LDPE Tape (PE 920)
General printing guidelines *
Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 104 |
Print temp: ± 220 - 240° C |
Print speed: Medium / High |
Retraction: Yes ± 5mm |
Heat bed: ± 0 - 65° C * |
Fan speed: 50-100% |
Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings.
These ranges in settings should work for most printers, but please do feel free to experiment
outside these ranges if you think it is suitable for your printer. There are a lot of different type
of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Large Centaur PP prints can be printed on an unheated 2mm or 3mm PP plate, which can
be attached to the print bed. Smaller prints can be printed on standard PP packaging tape.
Filament length
ρ: 0.9 g/cc |
50 gr coil |
0.5 Kg spool |
|
|
|
Ø 1.75mm |
± 23.1m |
± 231m |
|
|
|
Ø 2.85mm |
± 8.7m |
± 87m |
|
|
|
Product export information
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present
standard of knowledge and may be amended if new cognitions are available and applies only
or the above described products.