ABSpro
ABSpro ist ein professionelles hochfestes ABS (Acrylnitril-Butadien-Styrol)-basiertes 3D-Druckerfilament
– das mit einer Mischung aus Styrol-Maleinsäureanhydrid (SMA) und Polykarbonat (PC) verstärkt wurde
– was zu einem unglaublich starken und noch schlagfesteren Filament führt. ABSpro ist extrem stark,
hat einen hohen Glanz und eignet sich hervorragend zum Bedrucken mechanischer Teile mit hoher Präzision und Fein
Detail und hat außergewöhnliche Ausdauereigenschaften.
Einzigartige Merkmale
-
extrem stark und Wiederstandsfähgi
-
extrem hohe Druckgenauigkeit
-
Hoher glantz
-
Gute chemische Wiederständigkeit
General printing guidelines *
Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 106% |
Print temp: ± 250 - 275° C * |
Print speed: Medium |
Retraction: Yes ± 5mm |
Heat bed: ± 100 - 120° C * |
Fan speed: 0-30% |
Experience level: Expert |
*) Above displayed settings are meant as guidance to find your optimal print settings.
These ranges in settings should work for most printers, but please do feel free to experiment
outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers,
hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Because of the relative high percentage of added PolyCarbonate, ABSpro has a tendency to warp
and therefore it is recommended to use a temperature-controlled build chamber and to prepare your
heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro.
Filament length
ρ: 1.05 g/cc |
50 gr coil |
0.5 Kg spool |
|
|
|
Ø 1.75mm |
± 19.8m |
± 198m |
|
|
|
Ø 2.85mm |
± 7.5m |
± 75m |
|
|
|
Product export information
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present s
tandard of knowledge and may be amended if new cognitions are available and applies only for the above
described products.