3D4Makers

3D4Makers
FACILAN™ C8
NEU

FACILAN™ C8 FILAMENT 750 GRAM 1.75MM

Print Settings 

  • Bed Temperature: Cold or 35
  • AdhesionUse PEI sheets. The material may adhere too well on glass when compared to other materials so use caution when removing parts. 
  • Print Temperature: 195 °C (193-220 °C).
  • Print Speed: 30 mm/s for the outer layer, 45 mm/s inner layer, 50 mm/s infill speed. 
Größe:
Lagerbestand: 2 Stück , Versandgewicht: 0,75 kg je Stück
49,90 EUR
inkl. 20% MwSt.
FACILAN™ ORTHO
NEU

FACILAN™ ORTHO FILAMENT 750 GRAM 

 Print Settings 

  • Bed Temperature: 30-45°C
  • Adhesion: PEI Sheets
  • Print Temperature: 130 to 170°C
  • Print Speed: 20 - 40 mm/s 
  • Notes: This material will flow readily from your nozzle, for best results use extra cooling on your model and bed.
Größe:
Lagerbestand: 0 Stück , Versandgewicht: 0,75 kg je Stück
91,90 EUR
inkl. 20% MwSt.
FACILAN™ PCL 100
NEU

FACILAN™ PCL 100 FILAMENT 750 GRAM 

Facilan™ PCL100 Material Properties 
  • Density: 1.1 g/cm³
  • Tensile Strength: 45 MPa
  • Elongation at Yield: 15 %
  • Tensile Modulus: 350 MPa
  • IZOD Impact Strength (notched): 8 kJ/m2
  • Shore D Hardness: 46
  • Heat Deflection Temperature (0,45 MPa): 57 °C
Größe:
Lagerbestand: -2 Stück , Versandgewicht: 0,75 kg je Stück
126,90 EUR
inkl. 20% MwSt.
Zeige 1 bis 3 (von insgesamt 3 Artikeln)