Accurate and fast with all ceramic materials. Ceramic 3D printer open and accessible
on three sides to interact during prints. With Delta WASP 40100 Ton it is possible to
print removable steel directly on the ground or on a printing surface.
You can also continue printing without waiting for the workpiece to dry, simply by moving the printer.
LDM WASP Extruder XL 3.0 compatible, extruder ideal for fast and large prints.
PRINTER DETAILS
Print volume: Ø 400mm x h 1000mm; (h 450 mm with intermediate plate)
Minimum layer height: 0.5 mm;
Maximum print speed: 150mm/s;
Maximum travel speed: 150mm/s;
Acceleration: 500mm/s2;
MATERIAL
Material: Porcelain, earthenware, gres, refractories, clay etc.
EXTRUDER CORES
LDM WASP Extruder: 1,5, 2, 3 mm nozzle diameter (Standard) LDM WASP Extruder XL: 4 mm, 6 mm, 8 mm nozzle diameter
HIGHLIGHTS
LDM clay extruder compatible
Removable plan
new 32 Bit card x4 performance
free Zeta-System (cc)
Resurrection System (cc)
higher temperature
Wifi module for remote control
Adjustable zero play scroll
SOFTWARE
Operative System: Windows, Mac, Linux;
Slicing-Software: compatible with all Slicing-Software (Cura – SLic3r – Simplify3D®);
data type: .stl, .obj, .gcode;
INTERFACE
SD-card
LCD-screen
PHYSICAL DIMENSIONS
Dimensions: 77 cm x 85 cm x h 195 cm (h 270 cm with tank support)
Machine weight: 80 kg
Dimensions for shipping the machine with wooden packaging: 100 cm x 100 cm x 230 cm, weight 130 kg
POWER SUPPLY
Input: 220/240V 50/60Hz (110V available);
Power absorbed: 200 W
N.B.: air compressor required (min. pressure 8 bar)
TEMPERATURE
using 20-30 C°;
stock 0-30 C°;
MECHANICS
Frame and support: sheet metal (reduces machine vibrations, guarantees the best print quality), aluminium, painted steel
Pressure bed: bed made of multi-layer wood
Movements: guides on anodized aluminum
Open pages give the ability to pause the printer and interact with the part as it prints
PRODUCT PACKAGE INCLUDES:
1 LDM WASP Extruder 3.0 with inox steel nozzle diam. 1.5, 2, 3mm.
1 container 5L
1 marine plywood print bed
10 kg red earthenware
Note: The air compressor and the tube that connects it to the 3D printer are not supplied by WASP.
A useful tip: it's a nylon tube that's usually supplied by the air compressor supplier.
If you don't have it you can buy it at any hardware store in the length you need,
ask for an 8mm (external dimension) nylon tube.
EXTRA RECOVERY SYSTEM
A system that allows the user to save their print job and resume it in the event of a power failure.
FREE Z-SYSTEM
The machine measures the height of the break in pressure and restarts from there.
TECHNICAL INNOVATIONS
No stop printing: you can move the printer without removing the object - every time the printing is finished (this avoids having to wait for the object to dry)
Printing from the ground or from 2 printing beds at different heights
Extruder with controlled dosing thanks to a screw (2013)
Controlled air pressure on the printer
Perfect stability thanks to a new, bearing-mounted sliding system