Quickly fabricate parts from the strongest engineering materials with the professional
3D printer Delta WASP 2040 INDUSTRIAL X
This is thanks to the new system with heated chamber and cooled mechanics
Printing technical materials even easier.
Delta WASP 2040 INDUSTRIAL X is made of metal with strong steel core straps
manufactured and has thermal and acoustic insulation.
Switching between the dual extruder "WASP ZEN X Extruder" for the
Single and multi-material printing or with the "WASP FLEX Extruder" for the
Printing of flexible materials (up to Shore 50A) takes only a few minutes.
The external bowden replaces the hanging one thanks to the new "Filament Driver X".
The grip on the filament is doubled and the force tripled thanks to two
hardened steel gears and a gearbox.
PRINTER DETAILS
Construction volume: Ø 200 x h 400 mm
Heated active chamber: heated up to 70°C
Minimum layer height: 50 microns
Printing speed max(*): 300 mm/s
Travel speed max(*): 500 mm/s
Acceleration(*): 10,000mm/s2
Bed temperature max: 120 C°
Extruder / nozzle diameter standard: WASP ZEN X extruder with MT cartridge, nozzle 0.4 mm
* All speed data refer to one
Delta WASP 2040 INDUSTRIAL X with WASP ZEN X extruder 0.4 mm.
MATERIAL
WASP-MATERIALS
compatible filaments
Ø1,75 with "WASP ZEN X Extruder"
Ø2,85 with "WASP FLEX Extruder"
ABS WASP
HIPS WASP
PA-KARBON WASP
PMMA WASP
TPU *only with WASP FLEX Extruder
EXTRUDER CORES
WASP ZEN X Extruder: Dual-Extruder for single-material, multicolor or multi-material prints,
with end filament sensor. Nozzle diameter: 0.4mm, 0.7mm (filament diameter 1.75mm)
WASP FLEX Extruder: Direct drive extruder for flexible materials up to Shore 50A.
Nozzle diameter: 0.4 mm (filament diameter 3 mm)
HIGHLIGHTS
automatic calibration system
Two speed filament driver
automatic multicore extruder detection
improved user interface
integrated end filament sensor
Live-View-camera
hot & cold technology
printing via usb
Video-Tutorial an Bord
wifi module for remote control
new 32 bit board x4 performance
Security sensor for open doors
precise heat-resistant mechanics
free-zeta System (cc)
closed space with thermo-acoustic insulation
higher temperature
Steel core tapes for high temperatures
Recovery System (cc
INNOVATIONS
Continuous Printing: When the extruder in use runs out of filament,
the print will continue with the other extruder (if it is loaded correctly).
Bed Touch System: automatic system that avoids the collision of the extruder on the plate.
Gcode analyzer: Gcode error checking system.
Auto Check System: Automatic error detection routine
Mesh autocalibration: Mesh plate calibration
Hot and Cold Technology: heated chamber and cooled mechanics
WIFI: Machine is connected to the network for monitoring and control
New GUI: New touch interface with larger TFT display
On-board camera: for surveillance and time-lapse
Remote Support: WASP technicians can work remotely on your machine in case of problems
MEASUREMENTS AND WEIGHT
Dimensions: 49cm x 44cm x 87cm
Machine weight: 38 kg
Dimensions and weight for packaging on pallet: 50 cm x 58 cm x 114 cm, weight 42 kg
