It is very easy to 3D print with Premium PLA CF03, it prints with great precision and superb layer adhesion. This filament does require the use of a 0.6 diameter nozzle.
While the main focus of this filament is on utilizing the aesthetics of carbon.
It still provides above average strength in comparison to regular PLA.
ReFill
ReFill offers a completely new way to experience 3D printing filament.
We’ve ditched the wasteful plastic spools altogether.
ReFill consists only of the filament coil itself, housed in a reusable, vacuum-sealed bag.
This significantly reduces waste compared to traditional spools.
FormFutura’s ReFill system is designed with the aim of lessening your carbon footprint.
It brings an 80% reduction in packaging waste, while potentially decreasing shipping volume by up to 55%.
The user-friendly system is compatible with nearly all FDM printers, including the widely used AMS system.
Premium PLA CF03 is our Premium PLA with circa 3% added carbon fibers.
This delicate filling with carbon fibers results in superb aesthetics. Easy printing. No visible layers. Amazing carbon surface finish.
Premium PLA CF03 is the filament of choice for prints that need a carbon look and feel.
It focuses on the aesthetics of carbon. Not on the mechanical properties of carbon.
You can even print Premium PLA CF03 with brass nozzles.
Important key features
PLA with amazing carbon look and aesthetics
3D prints without visible layers
Compatible with brass nozzles
High speed printing compatible
Biodegradability under composting conditions
Suitable applications
Home decor
Functional prototyping
Visualization aids
End use parts that do not require the full strength of carbon
General printing guidelines *
Nozzle size: ≥ 0.6mm
Layer height: ≥ 0.2mm
Flow rate: ± 100%
Print temp: ± 230 – 280°C
Heat bed: ± 50 – 60° C
Fan speed: 5-100%
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of
different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%.
Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct heat.
When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the printed object,
it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
