Pegasus PP-HGS25 Ultralight
Pegasus PP-HGS25 is a PP filament that is enhanced with hollow glass nanotechnology,
which makes this 3D printer filament 20% lighter and significantly stiffer than virgin PP filaments.
Pegasus PP-HGS25 Ultralight is most likely the lightest PP filament in the world!
Pegasus PP-HGS25 is a PP filament that is enhanced with hollow glass nanotechnology, which makes this
3D printer filament 20% lighter than virgin PP filaments. The modification with 25% hollow glass microspheres
made from soda-lime borosilicate glass not only make Pegasus PP-HGS25 an extremely lightweight filament,
but also significantly stiffer than normal PP filament. The inherent properties of the added hollow glass microspheres
provide a number of unique performance advantages, such as weight reduction, dimensional stability, thermal
insulation and a lower dielectric constant. This makes Pegasus PP-HGS25 an extremely versatile 3D printer
filament for various applications such as automotive, drones, floating applications, and applications that require
lightweight, wear resistant and durable parts.
Unique features
-
Extremely lightweight
-
-
Good wear-, abrasion-, and fatigue resistance
-
Significantly stiffer than normal PP filament
-
High chemical resistance
-
Does not absorb moisture
-
Excellent interlayer adhesion
-
Excellent buildplate adhesion with EasyFix Adhesive - Nr. V (for PP-GF)
General printing guidelines *
Nozzle size: ≥ 0.4mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 104% |
Print temp: ± 215 - 245° C |
Print speed: Low |
Retraction: Yes ± 5mm |
Heat bed: ± 0 - 100° C * |
Fan speed: 50-100% |
Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings.
hese ranges in settings should work for most printers, but please do feel free to experiment
outside these ranges if you think it is suitable for your printer. There are a lot of different type of
printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Large Pegasus PP Ultralight prints can be printed on an unheated 2mm or 3mm PP plate,
hich can be attached to the print bed. Smaller prints can be printed on standard PP packaging tape.
Filament length
ρ: 0.75 g/cc |
50 gr coil |
0.5 Kg spool |
|
|
|
Ø 1.75mm |
± 27.7m |
± 277m |
|
|
|
Ø 2.85mm |
± 10.5m |
± 105m |
|
|
|
Product export information
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present
standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.