LUVOCOM® 3F PP CF 9928 BK
LUVOCOM 3F PP CF 9928 BK is a carbon fiber reinforced PP filament for 3D printing strong
and stiff parts and is suitable for continuous discharging of statically-generated electricity.
FormFutura Luvocom 3F PP CF 9928 BK is a carbon fiber reinforced PP (polypropylene) based
3D printer filament that is extremely stiff and engineered for industrial applications. Luvocom 3F PP CF 9928 BK
is a low density 3D printing filament that displays good mechanical properties combined with outstanding chemical
resistance and continuous electrostatic discharge (ESD) properties.
Luvocom 3F PP CF 9928 BK features excellent printability with enhanced layer bonding, making it a perfect
3D printing filament for serial production of strong, stiff and ESD-safe end-use parts with an extremely high dimensional accuracy.
Key features
-
Lehvoss Luvocom Luvocom 3F PP CF 9928 BK
-
ESD surface resistance of 107Ω
-
For 3D printing strong, stiff and lightweight parts
-
Good chemical resistance
-
3D prints with high dimensional accuracy and increased layer adhesion
Applications
-
Medical
-
Functional prototypes
-
Drones
-
End-use parts
General printing guidelines *
| Nozzle size: ≥ 0.4mm |
Layer height: ≥ 0.10mm |
Experience level: Expert |
| Print temp: ± 220 - 230° C |
Fan speed: 10 - 50% |
Drying: 4-6h @80°C (max) |
| Heat bed: ± 65 - 75° C |
Enclosure needed: No |
Adhesion: EasyFix Nr. III |
*) Above displayed settings are meant as guidance to find your optimal print settings.
These ranges in settings should work for most printers, but please do feel free to experiment
outside these parameters if you think it is suitable for your printer. There are a lot of different
type of printers, hot-ends and printer offset that it is extremely difficult to give an overall
one-size-fits-all setting.
Abrasiveness
Please be aware that this 3D printing filament contains a relatively high concentration of
extremely hard carbon fibers, which have an abrasive nature. In general these carbon fibers
will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments.
We recommend to use nozzles from stainless steel or other hardened alloys.
Filament length
| ρ: 1.00 g/cc |
0.2 Kg spool |
0.5 Kg spool |
|
|
|
| Ø 1.75mm |
± 83m |
± 208m |
|
|
|
| Ø 2.85mm |
± 31m |
± 78m |
|
|
|
Product export information
| HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to
our present standard of knowledge and may be amended if new cognitions are available
and applies only for the above-described products.
