LUVOCOM® 3F PEEK 9581 NT
Luvocom 3F PEEK 9581 is one of the highest performing 3D printer filaments with exceptional
mechanical, thermal, and chemical resistance properties that can replace original metal and composite parts.
With FormFutura Luvocom 3F PEEK 9581 (Polyether Ether Ketone) we bring one of the most
used high performance polymers into a PEEK 3D printer filament. Luvocom 3F PEEK 9581
is a semicrystalline PEEK filament that has outstanding mechanical properties combined with
superb thermal and chemical resistance properties. Parts that are 3D printed with Luvocom 3F
PEEK 9581 filament are suitable for use in applications that will be exposed to short term service
temperatures of up to 260°C and continious service temperatures up to 250°C.
Luvocom 3F PEEK 9581 is a 3D printer filament that is capable to 3D print parts that can replace
metal and composite parts used in various industries. This PEEK filament unlocks industrial 3D printing
applications in various industries, such as aerospace, medical, oil & gas, energy, marine, and automotive.
Luvocom 3F PEEK 9581 filament allows one to 3D print parts with excellent layer bonding resulting in
an usnurpassed dimensional accuracy and z-strength for PEEK 3D printed parts.
Key features
-
Lehvoss Luvocom 3F PEEK 9581 inside
-
Suitable for applications with a continuous service temperature of 250°C.
-
-
Heat deflection temperature of 145°C
-
High Z-strength
-
Excellent mechanical properties
-
Flame resistance properties according to UL 94 V-0
-
Exceptional chemical resistance properties
Applications
The PAEK family
PolyArylEtherKetone (PAEK) is a family of semi-crystalline high performance thermoplastics that are
characterized by high mechanical strength and excellent resistance to temperature, chemicals and wear.
The most widely used members of the PAEK thermoplastic family are:
-
PolyEtherEtherKetone (PEEK)
-
PolyEtherKetoneKetone (PEKK)
-
PolyEtherKetone (PEK)
-
PolyEtherKetoneEtherKetoneKetone (PEKEKK)
-
PolyEtherEtherKetoneKetone (PEEKK)
General printing guidelines *
Nozzle size: ≥ 0.4mm |
Layer height: ≥ 0.10mm |
Experience level: Expert |
Print temp: ± 370 - 420° C |
Fan speed: 0 - 25% |
Drying: +4 hours at max.110°C |
Heat bed: ≥ 120° C |
Enclosure needed: 90°C heated chamber |
Adhesion: EasyFix Nr. VII |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings
should work for most printers, but please do feel free to experiment outside these parameters if you think it is
suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely
difficult to give an overall one-size-fits-all setting.
Filament length
ρ: 1.31 g/cc |
0.2 Kg spool |
0.5 Kg spool |
|
|
|
Ø 1.75mm |
± 63m |
± 159m |
|
|
|
Ø 2.85mm |
± 24m |
± 60m |
|
|
|
Product export information
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present standard
of knowledge and may be amended if new cognitions are available and applies only for the above-described products.