ColorFabb glowFill
And when the lights go out, there is glowFill. When you print it, with regular lights on or during the day,
it is a very nice, creamy filament with a very smooth finish.
Nice as it is, it changes when the lights go out. Then you will see it glow.
A special highly concentrated phosphorescent pigment is matched with our PLA/PHA compound,
so it’ll print just like our other PLA/PHA 3D printing filaments. It is by far one of the most fun filaments
which can lead to some fantastic prints.
- Glow in the Dark
- Fun for Kids
- Easy to Print
COLORFABB SPECIAL FILAMENTS
Innovation never stops at colorFabb. Our ever expanding range of special filaments
have been industry leading for years. Some of them are for aesthetic purposes,
others are pure functionality or for specific niche applications. Materials like woodFill, bronzeFill, XT-CF20,
LW-PLA, varioShore TPU and DPA-100 support filament were developed in-house
and have been successes ever since.
By listening to our customers’ needs and forging strategic partnerships with material OEMs
we are able to innovate continuously and bring FDM/FFF 3D printing to the next level.
SPECIFICATION
Material:
colorFabb glowFill - PLA/PHA + concentrated phosphorescent pigment |
Diameter Tolerance:
± 0.05 mm |
Density:
1.210-1.430 g·cm-3 |
|
Glass Transition Temperature:
55C
|
PRINTING ADVICE
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers.
We know our materials will give you excellent results and to help you get these results here
are tips and tricks for using colorFabb 3d printing filament.
Advised 3D printing temperature
195-220C* |
Advised 3d print speed
40 - 100 mm/s |
|
Advised Heated bed
50-60C (if you have one, not strictly necessary)
|
Cooling fan
- |
TIP! For a better and longer lasting glow time print your models with 100% infill
and charge up your models with some high power lights, or just let them enjoy the sunlight for a bit.
DOWNLOADS
Technical Data Sheet
Safety Data Sheet
