FUNMAT PRO 610HT 

FROM PEEK TO PEI, THE LARGE 3D PRINTER
FOR HIGH-PERFORMANCE MATERIALS

With the advanced thermal design featuring high-temperature and high-speed extrusion control technology,
FUNMAT PRO 610HT has become the perfect choice for printing high-performance materials such as
PEEK, PEEK-CF, PEEK-GF, PEKK, PEI9085, PEI1010, and PPSU.

PEEK-CF, PEEK-GF, PEKK, PEI9085, PEI1010, PPSU

ADVANCED THERMAL DESIGN
WITH UP TO 300°C HEATED CHAMBER

The high melting point of high-performance materials and its demanding requirements for high-temperature
processing is a challenge for the 3D printing.

Equipped with a uniformly heated chamber that can reach up to 300°C and a dual extruder capable of reaching 500°C,
the FUNMAT PRO 610HT can print nearly all high-performance thermoplastic materials available on the market,
ensuring superior print quality and enhanced mechanical properties of the printed parts.

In-depth research into material characteristics like PEEK, PEI, and PPSU, as well as rich experience in high-performance material process development
to maximizes the properties of the materials.

LARGE SIZE PRINTING CAPABILITY

Due to its spacious build volume of 610 x 508 x 508 mm, the FUNMAT PRO 610HT enhances productivity by 
enabling the printing of larger parts without the need for assembly and allowing for 
the simultaneous production of multiple smaller parts.

Print Larger

It offers higher strength, simplified post-processing, and is both time-saving and cost-effective.

Print More

Bolster productivity by printing multiple parts simultaneously, ensuring uniformity of material properties across all printed parts.

SUPERIOR SURFACE FINISH OF COMPLEX
GEOMETRIES WITH HIGH DIMENSIONAL ACCURACY

With a closed-loop servo control system and a high-precision ball screw drive system,
the accuracy of movement positions is significantly enhanced (with XY axis precision at 12.5 µm and Z axis precision at 1.25 µm),
ensuring remarkable surface finish at high printing speeds.

Dual nozzles with support material solutions provide high-quality surface finishes on complex geometries.

Water-soluble Support Materials

When printing complex geometries such as piping, where the support material is difficult to peel off manually,
water-soluble materials can be used to support the structure and dissolve in water, ensuring perfect printing quality.

Easy-to-Breakaway Support Material

The dual extruder design makes removing the support material easy without worrying about the roughness
of the contact surface caused by the peeling of the support material.

CONTINUOUS PRODUCTION 24/7,
GUARANTEED ROI

UNATTENDED OPERATION ENHANCES RELIABILITY, 
MINIMIZES DOWNTIME, AND MAXIMIZES PRODUCTION CAPACITY.

Intelligent design with auto-cleaning nozzles, filament auto-reloading, filament jam warning,
and filament absence warning to ensure seamless continuous printing.

Equipped with a liquid-cooling system for enhanced heat dissipation, preventing filament jamming issues,
and ensuring prolonged service life even under high-temperature conditions.

COMPATIBLE WITH OPEN-SOURCE FILAMENTS,
OFFERING VERSATILITY AND COST-EFFECTIVENESS

For us, everything was a go: the price, the size of the chamber, the features, and more.
We are always seeking new innovations and avoiding the mainstream, and with INTAMSYS and
high-temperature polymer 3D printing, we have achieved that.

NEW SLICING SOFTWARE INTAMSUITE NEO

Automated slicing for model design and repair. All-in-one collaborative additive manufacturing
platform for online monitoring and print process optimization.

ROBUST SAFETY DESIGNED
FOR HIGH-TEMPERATURE OPERATION

Incorporates a high-quality industrial safety control system with independent safety PLC,
upgraded electromagnetic safety locks, and redundant safety sensors.

Designed based on EN60204 safety standards.

This ensures comprehensive safety protection with minimized risks during the whole printing process.

• Extra large XL build volume 610 x 508 x 508mm
• 50 micron layers, up to 300 microns
• Liquid cooling for extruders
• Dual nozzle with auto cleaning
• 500°C max nozzle temp
• 300°C heated chamber
• 50°C active drying of filament (with air compressor option)
• 10″ touchscreen
• High precision industrial linear rail based motion
• 4x  filaments loaded with auto switching
• Vacuum system for build plate to secure parts whilst printing
• Choice of 3x build plate sheet materials (PC, Ultem, SS)
• Safety measures throughout inc. locking doors
• Network connectivity
• Air filtration
• Auto bed levelling
• Open source filament
• Unique HT support material
• Designed for continuous 24/7 production use
• CE, UKCA machinery directive compliant

Overall Dimensions: 

1710 x 1425 x 2080 mm

With lighthouse: 

1710 x 1425 x 2350 mm

Overall Weight: 1450 kg

Specification:

• Technology: Fused Filament Fabrication (FFF)
• Print volume (XYZ): 610 x 508 x 508 mm
• Printer dimensions (HWD):1710 x 1390 x 2250 mm
• Build Platform: Flexible Build-plates with Vacuum Adsorption
• Bed Levelling: Automatic
• Layer Thickness: 0.1 – 0.5 mm
• Nozzle Size: 0.4 mm (can be adjusted)
• Print Speed: max 160 mm/s
• Extruder Temp: max 500°C
• Chamber Temp: max 300°C
• Filament Drawer Temp: max 50°C
• Input File Type: STL/OBJ
• Filament Diameter: 1.75 mm
• Position Resolution: XY: 12.5 μm Z: 1.25 μm
• Motor Drive: High precision servo
• Certifications: FCC, CE, and UKCA
• Connectivity: USB, Network, WiFi
• Filament Sensor: Yes

Materials:

• PEEK, PEEK+CF, PEEK+GF, PEKK
• PEAK, AM200
• ULTEM 1010, 9085
• PPSU, PPS, PSU
• PA+CF
• PC, PA, ABS, ASA, PETG, HIPS, TPU, PLA, PVA
• CarbonFiber filled, Fiberglass filled
• ESD Safe
• FR flame retardant
• HT matched support materials
• Etc.

Sample printed parts in PEEK, Ultem 1010, Ultem 9085, CF-PA: