EasyFil HIPS was formerly known as LimoSolve HIPS.
EasyFil HIPS is a high-performance and easy to print High Impact
PolyStyrene type of 3D printer filament which doesn’t contain any added
colorants and dissolves completely in Limonene. Being soluble in Limonene
in combination with similar thermal properties to ABS make LimoSolve an outstanding
supporting material for complex dual extrusion ABS prints.
When not being used as support material EasyFil HIPS prints in an extremely bright white colour.
Unique features
-
Good support material for dual extrusion ABS prints
-
-
Very limited warping
-
High impact resistance
-
Extremely smooth, bright white and matte surface finish
-
Light-weight and durable
General printing guidelines *
| Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 104% |
| Print temp: ± 220 - 260° C |
Print speed: Medium |
Retraction: Yes ± 5mm |
| Heat bed: ± 90 - 110° C |
Fan speed: 20-50% |
Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings.
These ranges in settings should work for most printers, but please do feel free to experiment outside
these ranges if you think it is suitable for your printer. There are a lot of different type of printers,
hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.04 g/cc |
50 gr coil |
0.75 Kg spool |
|
|
|
| Ø 1.75mm |
± 20.0m |
± 300m |
|
|
|
| Ø 2.85mm |
± 7.5m |
± 113m |
|
|
|
Product export information
| HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to
our present standard of knowledge and may be amended if new cognitions are available and applies
only for the above described products.
