Creality K2 Plus Combo
High speed printer with innovative filament management system
The K2 Plus Combo from Creality combines groundbreaking technology with intuitive ease of use
and the fascinating multi-color printing that takes your projects to the next level.
Sturdy aluminum alloy frame
The sturdy unibody frame of the K2 Plus is custom-made from die-cast aluminum alloy
and CNC milled. The highest precision and stable printing behavior are guaranteed even at high speeds.
Large construction volume
With a build volume of 350 x 350 x 350 mm, the K2 Plus is suitable for printing large format
objects or several smaller objects at the same time.
Your models will be manufactured in record time with breathtaking attention to detail.
Speed meets precision
The K2 Plus, like its predecessors K1 and K1 Max, is characterized by its enormous printing speed
and precision. The 3D printer achieves printing speeds of up to ≤ 600 mm/s
at an acceleration of ≤ 30,000 mm/s².
Tip: The average noise level at standard speeds is less than 50 dB.
FOC-closed loop motors
Both the extruder and all XYZ axes of the K2 Plus are driven by closed servo motors.
With 32,768 microsteps per revolution, the motors achieve high torque
and outstanding responsiveness. A FOC control with variable voltages reduces
the heat build-up and prevents blockages caused by overheating.
Apus all metal Extruder with tri-metal heat protection nozzle
The K2 Plus uses a Direct Drive Apus all-metal extruder with tri-metal heat protection nozzle for precise
and smooth extrusion. The nozzle is designed and enables printing temperatures of up to a maximum of 350 °C
also the processing of high-performance materials.
Automatic Anti-tip leveling
With two optical distance sensors for automatic inclination adjustment of the building board on the Z-axis
and a strain gauge in the print head ensures accurate leveling.
additional Features:
- 00 watt AC high performance heating system with overheat protection and automatic power off in case of unexpected errors,
- Nozzle camera for pressure calibration and chamber camera for pressure monitoring and detection of printing errors,
- 4.3 inch color touchscreen.
Creality CFS
The K2 Plus Combo is equipped with the intelligent filament management system CFS (Color Filament System).
The multi-material system has 4 spool slots that allow multi-color printing and simultaneous
Support the use of different materials. If the device is combined with other color filament systems,
A total of 16 colors can be printed with a wide range of color combinations.
The system automatically loads and unloads the filaments
– the tedious manual filament change is no longer necessary. In addition to this, the well-sealed
Multicolor device with smart temperature and humidity displays as a filament dry box
can be used for storing and storing the filaments.
Automatic RFID recognition of materials is supported.
Tip: The CFS can hold four 1kg spools with a diameter of 197-202mm.
The Creality filaments with cardboard spools are compatible with the CFS. Filaments such as PLA, PETG, ABS, ASA
or PA-CF can be easily edited in the CFS; flexible materials such as TPU
or wet filaments such as PVA/BVOH are not supported.
Including in Delivery:
- 1 x K2 Plus
- 1 x CFS
- 4 x Hyper PLA mit RFID-Chip (Black, White, Red, Blue), 500 g each
- 1 x Tool Kit inkl.:
- Glue stick, grease
- Flush Cutter, Scraper,
- L Key Set 8 x Screwdriver Bits,
- 2 x Socket Screwdriver Bits,
- Handle Nozzle wiper
- USB-Drive, 16 GB
- 1 x Filament Swatch for Creality filaments
- 1 x 0.4mm nozzle for K2 Plus
- 1 x Cutter + Cutter Rod
- 1 x Filament Sensor PCB
Technical specifications:
| K2 Plus size |
495 x 515 x 640 mm |
| K2 Plus weight |
33,5 kg |
| build volume |
350 x 350 x 350 mm |
| max. printing speed |
≤ 600 mm/s |
| max. acceleration |
≤ 30000 mm/s² |
| max. printing speed |
≤ 350 ℃ |
| max. print bed temperatur |
≤ 120 ℃ |
| max. chamber temperatur |
≤ 60 ℃ |
| Extruder |
Apus Dual Gear Direct Drive Extruder |
| Filament diameter, nozzle diameter |
1,75 mm, 0,4 mm |
| XYZE-Motor |
Stepper servo motor |
| leveling |
automatic anti-tip leveling |
| Interface |
USB drive, Ethernet, WiFi |
| Device Display |
4,3 Zoll color-Touchscreen |
| Slicer |
Creality Print5.0 |
| rated voltage |
100-240V~ AC 50/60Hz |
| rated voltage |
1200W |
| included Features |
Surveillance AI camera
Calibration AI camera
Filament runout sensor
automatic filament change
Filament entanglement sensor
Air purifier
G sensor
lighting
active chamber heating |
| optional Features |
RFID-Filament |
| UI-languages |
Englisch, Spanish, German, French, russian, portuguese, italian, Türkisch, Japanisch, Chinesisch
|
