Centaur PP
Centaur PP is a lightweight and high-performance Polypropylene 3D printer filament.
Centaur PP 3D prints with a superb interlayer adhesion and features outstanding mechanical properties.
Centaur PP is a lightweight and high-performance Polypropylene (PP) filament, which is engineered
to have outstanding mechanical properties and a superb interlayer adhesion. Centaur PP
combines a unique set of material properties into a 3D printer filament, which makes Centaur PP
an extremely diverse and multi-functional material suitable for numerous applications ranging from
3D printing dishwasher proof and microwave safe household articles to functional engineering
objects with great endurance properties.
Unique features
-
Food contact compliant natural variant
-
Dishwasher proof and microwave safe
-
Lightweight
-
-
Watertight printing possible with only single wall prints
-
Great elastic properties
-
-
Improved wear-, abrasion- and fatigue resistance
-
High chemical resistance
-
Excellent interlayer adhesion
-
Excellent adhesion to Eurocel LDPE Tape (PE 920)
General printing guidelines *
Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 104 |
Print temp: ± 220 - 240° C |
Print speed: Medium / High |
Retraction: Yes ± 5mm |
Heat bed: ± 0 - 65° C * |
Fan speed: 50-100% |
Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings.
These ranges in settings should work for most printers, but please do feel free to experiment
outside these ranges if you think it is suitable for your printer. There are a lot of different type
of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Large Centaur PP prints can be printed on an unheated 2mm or 3mm PP plate, which can
be attached to the print bed. Smaller prints can be printed on standard PP packaging tape.
Filament length
ρ: 0.9 g/cc |
50 gr coil |
0.5 Kg spool |
|
|
|
Ø 1.75mm |
± 23.1m |
± 231m |
|
|
|
Ø 2.85mm |
± 8.7m |
± 87m |
|
|
|
Product export information
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present
standard of knowledge and may be amended if new cognitions are available and applies only
or the above described products.