All you need for secure adhesion of 3D printing, is Magigoo to the "first layer does not stick"
to solve an easy-to-use 3D printing adhesive which has been developed. Magigoo ensures
strong adhesion to the heating plate. But the magic begins when the pressure is ready: Just wait,
is cooled to the plate, and then remove your impressions with just a tap! In addition helps Magigoo
to prevent warping. Is not it magical? Regardless of whether you are a hobbyist or a professional
- it's extremely rewarding, a 30-hour pressure completely without deformation to have and to
be able to easily replace him after cooling.
With us, even very good results were obtained with PEEK and Ultem.
Advantages:
More than 100 applications
ABS, PLA, PETG, HIPS, ASA, TPU
Simple application
simple release
Easy to clean
No odor
non-toxic
No additional tools required
Easy to transport
Better print image
main features
Ease of Use: The use of Magigoo is easy. , Press shake, apply. Only distribute on an active print area.
It is not necessary to cover the entire surface.Easy to solve: The adhesive properties of Magigoo
are designed so that the 3D printing will be released once the building board has cooled.
Easy to clean: Magigoo can be easily cleaned with water.
Durable: Magigoo holding for more than 100 average printouts.
Odorless and safe: Magigoo is safe to use - be it in a closed room or in a training workshop with children.
Important note: The applicator has an active spring valve that is activated when the applicator is pressed
against the building board. Please do not squeeze the bottle as "ketchup bottle", otherwise, the applicator
can come off. The bottle can be easily squeezed, only when the spring is pressed against the bed and only
if a larger flow is required. The bottle must not be crushed when the shutter is opened at a different time,
as this may lead to adhesive flows from the bottle.
