was developed specifically for the processing of glass-reinforced polypropylene
(GFPP) filaments and ensures that the prints strongly adhere in hot pressure
bed and the part is easily removed after cooling.
WHY:
polypropylene (PP) is a thermoplastic semi-crystalline polymer having properties such as
good strength, impact strength and ductility, which makes it suitable as a construction material.
However, PP is a soft material and, like the majority of plastics are reinforced by the introduction
of fibers into a polymer composite material. These materials are useful as the base polymer
and can typically result in stiffer and stronger in a material with a very high ratio of strength to weight.
Compared to most pure PP filament deforms the GF30PP stronger.
This type of material requires a completely new adhesive formulation to its distinctive properties to unfold. ,
HOW:
Magigoo PP-GF is designed and tested to work with 30% glass-filled polypropylene.
Shake the bottle vigorously.
Apply to the desired location by pressing the spring on the bed
(activation of the internal valve) and spread as needed.
Print according to the recommendations of the filament / printer manufacturer.
Let cool and remove.
Wipe with a damp cloth - cleaning.
SAFETY:
No known hazards
tips:
For demanding prints a 20 mm Brim with two layers is recommended.
Clean the building board and align it well before printing out.
