is designed so that it works exclusively with filaments of the type polycarbonate.
This adhesive for professional use ensures that the pressures in hot bed pressure adhere
firmly, and the part is easily removed after cooling. This unique and innovative mechanism
allows that no tools are needed to remove prints from the bed to. You just jump off when the bed cools.
WHY:
The strength and toughness of the PC make it an ideal FDM material for the production of functional
prototypes and end parts, yet provides the material some challenges to the pressure. Virgin PC has
a high glass transition temperature (Tg) and can therefore be used in high temperature applications.
A high Tg it may make it very difficult to work with desktop printers to print, since they are not usually
equipped for high pressure temperatures that are required for the printing of pure PC. Virgin PC
actually tends to warp significantly if it is printed at an insufficient bed temperature (<130 ° C)
in unheated closed chambers without the use of a suitable adhesive bed. Some manufacturers
have improved the printability of PC through the use of plasticizers or mixing with other materials.
Nevertheless, some difficulties are to be observed in the use of these solutions, first, the liability
can especially on larger parts still be a problem. In addition, some bed liability films have been
proposed to avoid the occurring in larger print rejection, but in this case there is a high tendency
that the adhesive film material used fuses irreversibly with the pressure. This means that the
expensive plate must be frequently removed and also requires a lot of post-processing and cleaning.
Magigoo PC can be used on glass or more other surfaces. The use on other surfaces based
on plastics, including plates,
HOW:
Magigoo PC is designed and tested to work with different PC Filamentmarken.
Since the composition of each plastic is slightly different, the ideal settings for Magigoo PC may vary.
Shake the bottle.
Apply to the desired location by pressing the spring on the bed
(activation of the internal valve) and spread as needed.
Print the recommendations of the filament / printer manufacturer.
Let cool and remove. The pressure should occur immediately.
Wipe with a damp cloth - cleaning.
SAFETY:
Use of this product with other filaments as PC filaments can lead to over liability and damage the worksite surface.
Tips:
For larger prints a 20 mm Brim is recommended with several layers.
In case of excessive liability is recommended to make the printing bed with a small
amount of water wet and edit it slowly under the part, which should facilitate the removal of the part.