SUNLU FilaDryer S4

SUNLU FilaDryer S4, for four spools at once

High Capacity

Internal size 450*210*211mm, can dry 4 rolls of 1kg consumables at the same time,
to meet the user's multi-color printing and multi-computer printing needs.

Rapid Heating

Built-in 300W PTC heater, heating to 50℃ in 30 minutes, faster and more efficient.

3 Levels of Safety Protection

PTC (Positive Temperature Coefficient Thermistor), temperature switch, and software
triple protection, real-time temperature monitoring, and alarm prompts when the
temperature is abnormal, for greater safety.

Temperature Balance

The left and right side circulating fans and the bottom heating fan in the chassis ensure
that the temperature in the chassis is balanced ±3℃, and every part of the consumables
can get a perfect drying effect.

Adjustable Humidity

Adjust the humidity in the chassis, the humidity in the box reaches the set value (30%-50%)
will automatically start until the humidity drops to 25% and then stops, to better meet the
humidity needs of different types of consumables.

High Compatibility

Support with all models of printers connected to the use; support 4 printers at the same time
baking material printing; compatible with consumables wire diameter 1.75mm, 2.85mm, 3.0mm.

Name: S4-Filament Dryer
Model: S4-FD
Filament Diameter: 1.75/2.85/3.0mm
Operating Humidity: ≤90%
Operating Temperature: 15°C~35°C
Temperature Setting Range: 35°C~70°C

Net Weight: 4.8kg
Outer Size: 516*278*350mm
Gross Weight: 5.5kg
Qty/Box: 1pc
Size: 458*218*312mm (including the height of the tripod)
Color: Black
Maximum Capacity: 450*210*211mm
Power Input: AC 110V~240V 50Hz/60HZ
Rated Power: 320W

Contains:
1* S4 drying box, 1* power adapter, 1* user manual, 2* Teflon tubes (100cm),
4* Teflon tubes (8cm)

Warranty:
1 year warranty, damages caused by the use of a non-original brand power supply
or not following the instructions for correct operation are not covered by the warranty.