PA12 Industrial, 10 kg
Functions:
- very good dimensioning accuracy
- biocompatibile
- excellent mechanical properties
- high chemical resistance
Applications:
- final parts
- functional prototypes
- jigs and fixtures
- parts with very good dimensioning
Spezification:
Material type: Nylon 12
Dedicated for: Lisa X, SUZY
Software: Sinterit Studio Basic
Material refreshing ratio¹: 30%
Color: Grey mat
Nitrogen needed: no
Mechanical properties
Tensile Strength: 52.3 MPa
PN- EN ISO 527- 2:2012
Tensile modulus (Young): 1840 MPa
PN- EN ISO 527- 2:2012
Flexural Strength: 60.6 MPa
PN-EN ISO 178:2019
Impact strength Charpy method (unnotched): 29.5 kJ/m
2
PN- EN ISO 179- 1/1eU:2010
Thermal properties
Melting point:184.4°C
PN-EN ISO 11357-3:2018
1. Refresh ratio is the amount of refreshing powder required to be mixed after a print with unsintered material.rnrnInformation provided within this document shows values for reference and comparison only. Parameters presented in this specification are subject to change without notice. Final part properties may vary based on a printed part design and orientation, material handling as well as printing environment (humidity and temperature). The manufacturer is responsible for validation whether the printout is accurate and fit for the intended purpose.rn
