SINTERIT Dedicated Powder Tools für Lisa Pro

With this comprehensive set of powder tools, you will save both time and powder, while keeping your workspace
nice and tidy. Since now, your on-print preparation could be twice as fast.

New powder tools cover the whole printing process, from the initial startup, through taking out the printouts,
postprocessing, and cleaning, both the printouts and workspace. With the service kit, you get a 360° SLS printing
xperience. Now there is all you need to act professionally.

FUNNEL / TROWEL / IO BOX / FOLDABLE TRAY

+

SERVICE KIT / ELEMENTARY TOOLS / POWDER TOOLS / DOCUMENT BINDER

POWDER FUNNEL /

Simple solutions are often the best. We have tested countless powder-in systems, and we are sure that the
Powder Funnel will give you the best results and versatility. It allows you to fill the printer without spraying
the powder in the air. One more thing – Powder Funnel is compatible with the new powder container,
Sinterit Sieve, and Powder Separator in the ATEX Vacuum Cleaner.

TROWEL /

Sinterit Trowel isn’t a new device, but it was redesigned to fit the whole feed bed. Now the tamping process
is faster and is done in just one move. This ensures uniform pressure distribution and proper powder density.

IO BOX /

The IO box was initially designed to take out ready printouts. Now it has one more function. When you turn
one of the parts upside down, it can be used as a guide to powder in the printer. It perfectly fits the feed bed
so it secures the pyrometers and mechanical elements. All of the powder will fall only into the feed bed, and
nowhere else.

FOLDABLE TRAY /

It is not only foldable and light, so very easy to store but has an optimal workspace for initial post-processing.
Most SLS 3D printing users don’t have dedicated, portable working space for “dirty work”, easy to bend, and
clean. Foldable Tray is a perfect solution. You can easily vacuum it or just simply pour the powder into a bucket. 

SERVICE KIT /

The attached service kit with all maintenance parts will keep your printer working for 1000 hours. Spare recoater cords,
silicone oil, set of cleaning wipes, cotton cloths, and spare heaters supplies will make you prepared for any typical
maintenance action.

Sinterit New Powder Tools were designed to keep the powder only where it should be. If SLS 3D printing is like having
a dish, then the powder tools are like knives and forks. Of course, you can eat with your bare hands, to feel the taste,
but you will need to clean a lot, afterward.