PEI Build Plate Assembly with Soft Magnetic Laminate (Pro2 Series Only)
PEI Build Plate for Raise3D Pro2 Series
Print Area:
305 × 305 mm
Printer Compatibility:
Raise3D Pro2 Series
Included:
- 1 × PEI Build Plate (Pro2 Series only)
- 1 × Soft Magnetic Laminate
Product Description:
The PEI Build Plate (Pro2 Series only) is made from high-strength spring steel with
a double-sided PEI powder coating. It features high temperature resistance, excellent flame retardancy, high strength, and rigidity.
Benefits:
- Double-sided PEI coating – both sides can be used for printing, providing long durability.
- High flatness and flexible design for easy model removal – simply bend the plate gently.
- Heat resistant, flame retardant, strong, and dimensionally stable.
- Compatible with a wide range of printing materials.
- Strong first-layer adhesion (some filaments may require additional glue).
For details on filament compatibility and glue requirements, please refer to the material compatibility list.
Notes:
- If using the PEI Build Plate for the first time with a Pro2 printer, please purchase the set including the Soft Magnetic Laminate and apply it before use.
- Once the magnetic layer is installed, additional PEI plates can be purchased separately as replacements.
- After applying the magnetic laminate and PEI plate, recalibrate the nozzle height according to the instructions.
- The current slicing profiles for the Pro2 series are compatible with this plate.
- Dust, grease, and residues may reduce adhesion. Clean regularly with mild detergent (e.g., alcohol and water). Do not use harsh cleaners or acetone as they may damage the PEI surface.
- If adhesion decreases, gently sand the textured PEI surface with fine sandpaper (600 grit recommended).
- The PEI coating may leave a texture on the bottom of printed parts. For smooth surfaces, use a raft – note increased filament usage and risk of damage during raft removal (especially for thin walls).
- Avoid using spatulas to remove models, as this can scratch or damage the PEI surface or cause coating to peel off.
Safety Warnings:
- The plate edges are sharp – handle with care to avoid injury.
- Do not touch the plate during printing.
- The plate becomes extremely hot after printing – allow it to cool before removal.
| Especially for: |
Raise3D Pro2, Raise3D Pro2 Plus |