TreeD PAKK Filament Black Hole

1,75mm 750g

Pakk is an advanced and truly exceptional filament capable of self-extinguishing in the event of fire. It is the only
filament on the market that can be certified UL94 class V0 a starting from a thickness of 0.5 mm. Mainly used in
the electricity market and electronic for printing all those materials that must have V0 certification such as junction
boxes or cable glands. Also used in public places and in panels or circuits electrical.

Color: 9005 Black Hole

FLAMMABILITY: UL94 V0
HDT: 90° ISO 75
Water absorption: <0,3% ISO 62
Tensile strength: 55 Mpa ISO 527

Pakk is extremely resistant to shocks and high temperatures and does not deform if exposed to UV rays. It is easy
to print and does not cause print retraction problems and does not clog the extrusion nozzles, allowing simple and
continuous printing.
It is compatible with most of the printers on the market that adopt the FFF and FDM technology. It does not require
post printing and is presented with excellent
matte finishes.

Pakk is a product made entirely by TreeD Filaments, 100% made in Italy. Available in black.

General printing recommendations:
To obtain unique and excellent results we recommend and the filament at 90 ° C for at least 4 hours. For 1 kg rolls,
increase the drying time. During printing, do not leave the filament stationary inside the nozzle for more than 20 minutes.
Stop the thermal control if the temperature drops below 210 ° C.

Follow your printer’s instructions.
To increase Pakk’s tenacity and solidity, we recommend performing the annealing cycle (link to the blog).