PPprint P-support 279 natural

‘P-filament 721’ is available in diameters of 1.75 mm

Weight: 600g/Coil
Color: white

The polypropylene filament ‘P-filament 721 white’ offers excellent 3D printing performance with low warpage and shrinkage
combined with extremely high layer adhesion. ‘P-filament 721’ can be printed with almost all 3D printers. Printed parts of
‘P-filament 721 white’ are very break-resistant, have very good mechanical properties, excellent chemical resistance, good
temperature stability, and low friction resistance. Due to its low density, it is excellently suited for lightweight construction.
Applications ranging from technical components to individualized decorative and art objects to toys can be realized. The
food safety of the PP starting material used opens up additional possibilities.

Preparation of PP-filaments ‘P-filament 721 white‘:
‘P-filament 721 white’ does not need to be dried before 3D printing and can be used without pre-treatment.

Recommended printing parameters:
‘P-surface 141‘ absolutely required as printing build surface
Extruder temperature: 200 – 220 °C
Print bed surface temperature: 20 °C (50 – 70 °C recommended for the first layer, 100 – 110 °C for non-destructive removal after completion)
Chamber temperature: not required

Storage instructions:
To ensure constant print performance, ‘P-filament’ should be used as soon as possible after opening (preferably within 15 months).
It is recommended to store open material at a temperature of 15 – 25°C and in a plastic bag to avoid dust contamination.