STYX-12 - Nylon PA12

STYX-12 - Nylon PA12
STYX-12 is an industrial PA12 grade nylon filament which combines excellent mechanical, chemical and
hygroscopic properties with printability. 
STYX-12 has a very low water absorption compared to other nylons and can be printed at relatively low
temperatures. This combination of properties has resulted in high-performance and industrial-grade nylon
which can be printed on a wide-range of FFF/FDM 3D printers.

Unique features

• Superb mechanical properties

• • Strong, flexible, high impact resistance, high crack resistance, high scratch resistance

• Excellent chemical resistance

• Excellent weather and UV resistance

• Outstanding dimensional stability

• Good first layer adhesion to EasyPad + DimaFix prepared print bed

• Very clear in its natural form (without added colorants)

General printing guidelines *

Nozzle size: ≥ 0.2mm	Layer height: ≥ 0.1mm	Flow rate: ± 100 - 110%
Print temp: ± 240 - 270° C	Print speed: Low / Medium	Retraction: Yes ± 5mm (@45mm/s)
Heat bed: ± 80 - 120° C	Fan speed: 10-30%	Experience level: Intermediate / Expert

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most
printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different
type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.02 g/cc	50 gr coil	0.5 Kg spool
Ø 1.75mm	± 20.4m	± 204m
Ø 2.85mm	± 7.7m	± 77m