Prusa Pro HT90 3D-Printer

The Prusa Pro HT90 is a delta kinematics 3D printer with a cylindrical print area (Ø300 × 400 mm).
It is specifically designed to maximize the potential of advanced materials like ABS, ASA, PCCF
and PA. Its heated chamber, which reaches up to 90 °C, and innovative cooling system, provide
unparalleled layer adhesion and print quality.

With the HT90, you can print large objects without any warping, poor overhangs, or layer
delamination. Additionally, the Input Shaper technology enables ultra-fast printing prototypes
from PLA, PETG, and similar materials, all of them easily printable even with a closed chamber.

Equipped with a swappable print head featuring a high-temperature nozzle capable of reaching
500 °C, the HT90 also handles demanding materials like PEEK, PEKK, PPS, PSU, PES, PEI (Ultem)
for small to medium-sized objects. This makes it the most affordable 3D printer for high-performance
filaments. The built-in recirculation loop constantly purifies the air inside the chamber through a HEPA
filter. Both the High-Flow and High-Temperature print heads are included in the package.

The printer is easy to set up and configure, offering both a fully-featured offline operation for maximum
security and a robust online print management system.

Main Features

Ultra-fast Industrial printer

Ø300 × 400 mm Build volume

Nozzle temperature Up to 500 °C

Bed temperature Up to 155 °C

Actively Heated Chamber

HEPA and carbon Filter

Offline and online

Get the most out of your materials

The HT90 is engineered to maximize the potential of materials like ABS, ASA, PA, PCCF, Flex,
and more. Its 90 °C heated chamber provides unparalleled layer adhesion and print quality,
enabling easy production of large objects without warping or layer delamination. The innovative
servo flap redirects airflow to precise areas of the model within milliseconds, allowing the HT90
to print flawless overhangs with minimal supports without overcooling the printed object.

The most Affordable Printer for High-end Filaments

The high-temperature print head, high-performance heatbed, and actively heated chamber
make the HT90 the most affordable 3D printer capable of handling high-end materials.
Print small-to-mid-sized objects from such filaments as PEEK, PEKK, PPS, PSU, PES,
and even PEI (Ultem), a material extensively used in the aerospace industry.




 

From Aerospace to Medical

Thanks to its ability to handle a vast array of materials, the Prusa PRO HT90 is the go-to choice
for many different industries. Print engine parts and coolers, medical implants and functional parts
of machinery, valves, pipes, chemically-resistant components, durable heat- and cold-resistant
parts and much more. No project is too demanding for the HT90.

Innovative Rapid Cooling Solution

The unique air management system is designed for real-time airflow control and optimal
print quality with all materials. The print fan is on the side of the printer, forcing air through
a tube directly into the lightweight print head, while the high-speed flap redirects its flow
within milliseconds, faster than any normal cooling fan can do. This enables vastly
improved printing of overhangs while the layers in the rest of the print do not suffer from
overcooling.

Additionally, a closed-loop air recirculation system with a HEPA filter keeps the chamber
free of ultra-fine particles, while an automatic intake flap manages temperatures for
materials like PLA and PETG, so you can print them with the chamber closed. The key
components are placed outside the heated chamber, prolonging their lifespan.

Large and Precise

Achieve unparalleled precision with the Prusa PRO HT90! We have tuned the print profiles so
that you can design precise parts and work with great accuracy. The print volume is a full cylinder
with a 300mm diameter and 400 mm tall Z-axis. The printer has a small footprint that is further
enhanced by a vertically sliding door to save more space.

Swappable Print Heads

The print head is held in place using magnets. Simply detach it from the arms, disconnect the
cable from the top of the printer and replace it with a different model. The High-Flow Print Head
with a quick-swap 0.4mm Revo nozzle is the perfect choice for rapid prototyping with materials
up to 300 °C. In contrast, the High-Temp head with an abrasive-resistant quick-swap 0.6mm
Revo nozzle reaches up to 500 °C and enables printing with materials such as PEEK, PEKK,
or PEI (Ultem). Both print heads are included with the HT90 and the hardware is compatible
with all Revo nozzles with diameters from 0.25 - 0.8 mm.

Actively Heated Chamber with HEPA Filter

The printer’s actively heated chamber with a closed HEPA and carbon filter recirculation loop can
reach up to 90 °C, providing an optimal environment for even the most demanding materials.
Print large robust objects from ABS/ASA without negative side effects, such as warping or layer
separation, use PLA for quick prototyping, and create durable objects from PEEK or PEI.

High Speed, Great Print Quality

The HT90 delivers smooth, dimensionally precise prints without typical artifacts present on
CoreXY or cartesian 3D printers. This is because the movement of the direct-drive extruder
is controlled by a coordinated shift of three lightweight arms, while the printed objects remain
stationary. Equipped with Klipper firmware and Input Shaper technology, the HT90 achieves
ultra-fast speeds while maintaining top print quality across the entire cylindrical print area.

Always-perfect First Layer

Three high-precision Loadcell sensors measure the distance between the nozzle and the print
sheet with exceptional accuracy. This enables the printer to automatically achieve an absolutely
pristine first layer, no matter which print surface you choose, without any need for manual
adjustment.

Easy setup, Automatic calibration

Once you unpack the HT90, you can start printing in mere minutes. The entire preparation
process is fast and accompanied by easy-to-follow instructions. Everything is controlled
using a large 7’’ touchscreen. Finish the automatic calibration, load a filament of your choice,
and start printing!

Maximum Security with Offline Mode

We understand the importance of security in industrial applications. While the HT90
offers a comprehensive remote print management system and surveillance, the printer
is fully prepared for a completely offline operation.You can even disconnect the Wi-Fi
module from the printer. We do not collect information about your prints or your printer’s
surroundings. No matter whether you’re developing a new-generation space shuttle or
just printing tools for your workshop, no organization should be interested in this information.

Robust Remote Management System

You can access two fully-featured remote print management systems depending on your
requirements. The HT90 offers both local and remote management modes - in the local
mode, the printer can be reached only from the local area networks, but you can also add
it into Prusa Connect, our secure remote print management system, so you can access it
from anywhere. Furthermore, you can take advantage of the built-in camera for print
monitoring and chamber lighting. Attaching an external USB camera is also possible.

Sample Prints
     
   

   

  

Technical Parameters

Basic package includes:

• Prusa PRO HT90 3D Printer
• Power cable
• Textured Powder-coated Print Sheet
• Wi-Fi adapter
• USB drive with sample print files
• Prusament ASA Jet Black 850g
• Alcohol-saturated wipes
• Side cutters
• High-flow print head
• High-temperature print head
• 3D Printing Handbook
• PTFE Lubricant
• Spare parts
• Filament holder

Accessories

Many of the high-end materials are hygroscopic, which means they rapidly absorb
moisture from air. To prevent degraded print performance, filaments need to be
kept dry at all times. For this purpose, the HT90 can be purchased along with
either a Drybox or a full-scale industrial filament dryer.

 Prusa Pro Filament Drybox

The Prusa Pro Filament Drybox is an essential accessory for working with
moisture-sensitive materials. This hermetically sealed box ensures optimal
conditions for storing and printing filaments that require low humidity, which
is crucial for maintaining print quality. Without this box, printing certain
materials is practically impossible. This is especially true for high-performance
polymers like PEI, PEEK, PEKK,or PSU, which require precisely controlled
conditions.

Memmert UF30 Dryer

Memmert UF30 is a high-performance lab oven made of high-quality, hygienic,
easy-to-clean stainless steel. It’s the perfect solution for precise filament drying,
with temperatures adjustable between +20 and +300 °C. Most of high-performance
materials are highly hygroscopic, meaning that they absorb moisture from the
environment.

This severely degrades their performance, even to the point of rendering them
completely impossible to print. With the filament dryer, you can easily reduce
the moisture content to optimal levels. Once the filament is properly dry, you
should place it directly into the  Prusa Pro Filament Drybox to prevent repeated
moisture build-up. The volume of the UF30 chamber is 32 liters.