D600 Pro3 HS

The World's #1 Selling Professional Large-Format 3D Printer

*According to CONTEXT (relevant data/reports), the D600 Series is the global sales leader in industrial 600×600×600 build volume 3D printing.

What's the News on the D600 Pro3 HS?

Dual Nozzle Shutter, Fully Automatic Syncronization.



Large Volume : 620x620x620 mm.

True external Air Cooling.

0,02 X, Y- Positioning Accurazy, HD Camera Dual Nozzle Offset.

Independent Quad Z-Axis

0,001 Accuracy - Eddy Current Bed Levelling.

Safety Door Lock

80° C Heated Chamber - Internal Insusation Cotton.

90 mm³/s Flow Rate

Stronger X-Rail

The First Layer Defines Print Quality.
Equipped with automatic mesh bed leveling, our large-format 3D printers ensure an ultra-smooth
and uniform first layer across the entire expansive platform for flawless printing results.

Full-Auto Dual-Nozzle XYZ Offset Calibration
XY via HD Macro Camera
Fully-Auto AI Visual Recognition
0.02mm Accuracy

Z via Dual Photoelectric Sensor
Full-Auto Multiple Positioning
0.005mm Accuracy

Eddy Current Bed Leveling 0.001mm Precision.
Revolutionizing Large-Scale Print Platform Calibration
The eddy current leveling system solves critical challenges in calibrating large build plates.
Utilizing high-frequency electromagnetic sensing technology, it achieves an ultra-high probing
accuracy of 0.001mm—improving precision by 99% compared to traditional methods. This
ensures perfect first-layer adhesion and guarantees printing success even with oversized
models. Featuring a non-contact, zero-wear sensor design, the system performs continuous
scanning without interruption, completing bed calibration in just 60 seconds—reducing leveling
time by 80% and significantly improving printing efficiency.

Auto-Raising Dual Extruders | 420℃.
Flow Rate:90 mm³/s
Heating to 400°C:2 Mins
Thermostat Accuracy:±0.15 °C
The D600 Pro3 HS features a next-gen smart auto-raising dual-extruder kit, capable of reaching
hotend temperatures up to 420 °C. The hotend can be quickly swapped for different nozzle sizes.
Enhanced with the upgraded Dual Nozzle Shutter technology, it delivers flawless printing with
different support materials. Combined with a topologically optimized lightweight design, the
printhead enables even higher printing speeds and greater motion agility.


Dual Nozzle Shutter.
Auto-switch to backup nozzle on filament runout.

Active Heated Chamber | 80℃.
The design employs a double-layer insulation cotton layer, allowing the cavity temperature to be
raised to 80°C. This is crucial for preventing the shrinkage and deformation of large engineering materials.
Reduces Thermal Stress & Warping
Improves Interlayer Bonding
Minimizes Moisture Impact
Ensures Process Consistency

When printing large or high-strength engineering materials (e.g., ABS), uneven cooling causes
internal thermal stress, leading to warping, delamination, or cracking.

Did You Know a Heated Chamber Can Warp Your Printer?

Ln large-format FFF 3D printing, when chamber temperature rises, the printer frame and structural
components also undergo thermal deformation—metal expansion, axis misalignment, and mechanical
part displacement. These micro-distortions accumulate layer by layer, ultimately leading to:

• - Layer Misalignment and Surface Roughness
• - Loss of Dimensional Accuracy
• - Structural Defects in Large Parts

This is why treating chamber temperature as an optional add-on, or claiming it can be retrofitted later,
proves these manufacturers just don't get it. They have no compensation for machine deformation—
some aren’t even aware of the issue. They simply add it as a feature to drive sales, with total disregard
for actual print quality.

 

With 8+ Years of R&D on the Chamber Temperature of FFF Industrial Printers

Our Solution: The Synergy of Two Patented Technologies—Intelligent Chamber Heating Algorithm &
Z-Axis Magic Box Technology:

Intelligent Heating Algorithm: Predicts and counteracts irregular deformations caused
by chamber temperature variations

Z Axis Magic Box: Maintains flawless surface finish via real-time thermal compensation for frame
and build-plate expansion.

Ultimate Result: Flawless prints produced even when slight machine deformation has already occurred!

Machine Weight Matters: Our robust construction significantly minimizes deformation.
The heavier the machine, the less distortion occurs!






Safety Door Protection System.
Enterprise-Compliant Secure Printing Solution
This safety-certified door monitoring system automatically halts printing operations immediately upon door
access detection, ensuring full compliance with enterprise safety protocols. The industrial-grade interlock
mechanism prevents unauthorized operation exposure, eliminates mechanical hazards, and maintains
full process accountability with encrypted operation logs.




Outage Restore & Filament Detection & Backup Mode.
The printer automatically memorizes the current position and saves print data when power is interrupted.
Upon restart, it resumes printing from the exact point of interruption, eliminating the need to restart entire
prints and saving valuable time and material costs.
The printer also prevents failed prints by pausing and alerting you when the filament runs out, allowing
you to replace the spool and continue printing without losing progress.
Backup Mode: If the filament in the main nozzle (No. 1) is exhausted, the printer automatically switches
to the secondary nozzle (No. 2) to continue printing, ensuring uninterrupted production even during
filament changes.


 

Magnetic Suction Platform

Proprietary magnetic platform, large, easily removable, and heat-resistant over 100°C,
and won’t demagnetize over time.
For oversized models, it is easy to detach them quickly and the bottom of the model
is flat. Convenient to all operators.

Linear Rail and Servo Motors.
When it reaches to 1000mm+ length, small rail have big deflection. The D600 Pro3 HS uses heavy-duty
linear rails and servo motors to ensure smooth and precise movement even at high speeds without
compromising the precision and reliability required for massive prints.




True External Air Cooling.
Medical-Grade Cooling Pump
Print Head Thermal Protection
True Air Model Cooling
Ultra-Quiet & Reliable: Equipped with a medical-grade pump, it delivers powerful, constant air pressure
with minimal noise. Engineered for 24/7 operation, it ensures a quiet and stable workflow for professional
environments.




Filament Dry Room.
Our 3D printer features an integrated filament drying compartment, which maintains a controllable
temperature environment of 0-70°C. Designed to prevent moisture absorption in hygroscopic
materials such as nylon, PC, PA-CF, PET-CF, It eliminates printing defects like bubbling and
stringing, ensuring consistent, high-quality output throughout the printing process..




Independent Quad-Z Axis
Quad-Z Auto-Leveling
Superior Load Capacity & Stability
Anti-Tilt & Torque Correction
Superior Layer Consistency

Eliminate Manual Leveling for Absolute Flatness: The independent four-motor drive allows for
individual height compensation at each corner of the platform. The system automatically detects
and fine-tunes the vertical height of every corner to ensure extreme parallelism between the build
plate and the gantry, completely solving first-layer adhesion issues for large-scale prints.

Ultra Air Filter System / 99.995% Adsorption.
Our advanced air purification system employs a dual-filter design: an initial HEPA filter captures fine particles,
while an activated carbon filter absorbs volatile organic compounds (VOCs) and odors. This ensures a clean
and safe printing environment, protecting both the operator and the printed parts from harmful emissions.

WIFI, LAN, Internet, APP Control.
In addition to cloud connectivity, CreatBot also supports local area network mode and physical connection operation.
You can control the printer, send sliced files, and update firmware without an internet connection..

Z magic box: Perfect Z surface.

For tall Z distance 3D printing devices, the texture of the Z-axis surface texture will deteriorate as the model
height increases. Our Z-axis magic box technology can greatly reduce or even eliminate the Z-surface texture
of tall models, ensuring that the surface quality of the model remains smooth and consistent.

 

Camera Control Technology.

Camera control technology allows customers to control the printing process on speed, pause, temp., etc., with
an APP remotely, achieving the best printing quality in the shortest time without failure. A very useful feature for
large models and long-time printing..




Technical Specs.

Printing
Print Technology	FDM
Build Volume	Single extrusion:620 x 620 x 620mm Dual extrusion:565 x 620 x 620mm
Number of Nozzles	Double
Auto rising extruders	Yes
Min layer height	0.05mm
Filament Diameter	1.75mm
Filament Compatibility:	PLA, ABS, ASA, PP, PETG, PC, Nylon, TPU, ABS-CF, PC-CF, PET-CF, PET-GF, UltraPA-CF, PPS-CF, etc, PA-GF, PA-CF, PA-ABS, PC-ABS, PP-GF, PP-CF
Nozzle Diameter	0.6mm (0.3, 0.4, 0.6, 0.8,1.0mm)

Temperature
Max. Nozzle Temperature	420°C
Max. Bed Temperature	120°C
Max. Chamber Temperature	80°C
Filaments Drying Temperature	0-70°C (Timed)

Speed
Max Print speed	300mm/s
Flow Rate	90 mm³/s

Electrical
Power Requirements	240V, 50-60Hz
Rated Power	Printer: 2500W, Chamber: 3000W
Screen	7 inch touch screen
Connectivity	USB/U disk/WiFi/LAN

Software
Software Bundle	CreatWare, OrcaSlicer, Cura,Slice 3r
Supported File Types	Gcode, STL, 3MF, OBJ, AMF, STP, STEP
Operating Systems	Windows ALL / Mac OS

 

Special Function
Air filter	HEPA+Carbon
Filament Detection	Pause Printing
Firmware	Klipper - High Speed
Camera Control	Camera Remote Monitoring
Dual Nozzle Shutter	Yes
Bed Leveling Technology	Eddy Current Leveling
XY Offset Technology	HD Camera Dual Nozzle Offset
Z Offset Technology	Dual Photoelectric Sensor
Nozzle Shutter Technology	Dual nozzle shutter
Door Opening Detection	Safety Door Lock
Chamber Insulation	Internal Insulation Cotton
External Air Cooling	Yes

Mechanical
Build Plate	Aviation Aluminum Plates
Build Plate Leveling	Automatic
Extruder	Smart Dual Extruders
Auto-Raising Extruders	Yes
X/Y Positioning Precision	0.00375 mm
Z Positioning Precision	0.00156 mm
Z-Axis Structure	Independent Quad-Z Axis

Size & Weight
Product Dimensions & Weight	1150 x 950 x 1250mm 250kg
Packing Size & Weight	1175 x 1015 x 1405mm 290kg