.jpg "CreatBot")
The First Layer Defines Print Quality.
Equipped with automatic mesh bed leveling, our large-format 3D printers ensure an ultra-smooth
and uniform first layer across the entire expansive platform for flawless printing results.
Full-Auto Dual-Nozzle XYZ Offset Calibration.
XY via HD Macro Camera
Fully-Auto AI Visual Recognition
0.02mm Accuracy
Z via Dual Photoelectric Sensor.
Full-Auto Multiple Positioning
0.005mm Accuracy
Eddy Current Bed Leveling 0.001mm Precision.
Revolutionizing Large-Scale Print Platform Calibration
The eddy current leveling system solves critical challenges in calibrating large build plates.
Utilizing high-frequency electromagnetic sensing technology, it achieves an ultra-high probing
accuracy of 0.001mm—improving precision by 99% compared to traditional methods. This
ensures perfect first-layer adhesion and guarantees printing success even with oversized models.
Featuring a non-contact, zero-wear sensor design, the system performs continuous scanning
without interruption, completing bed calibration in just 60 seconds—reducing leveling time by 80%
and significantly improving printing efficiency.
Auto-Raising Dual Extruders | 420℃.
Flow Rate:90 mm³/s
Heating to 400°C:2 Mins
Thermostat Accuracy:±0.15 °C
The D400 HS features a next-gen smart auto-raising dual-extruder kit, capable of reaching hotend
temperatures up to 420 °C. The hotend can be quickly swapped for different nozzle sizes.
Enhanced with the upgraded Dual Nozzle Shutter technology, it delivers flawless printing with different
support materials. Combined with a topologically optimized lightweight design, the printhead enables
even higher printing speeds and greater motion agility.
Automatic Dual Nozzle Shutter.
This innovative system features a precision mechanical shutter that automatically closes over the nozzle
of the idle extruder the moment it lifts away. By creating a physical seal, it effectively prevents oozing and
cross-contamination between materials, ensuring flawless multi-material and multi-color prints. It's the key
to achieving pristine quality and reliability in every layer.
Scale Without Limits for High-Strength Prototypes.
The CreatBot D400 HS was created to make industrial 3D printing of large-scale objects and prototypes
as easy as possible. It is embedded with many advanced technologies for ultra-large, impressive prints.
It will undoubtedly be your best choice if you are looking for an industrial large-scale 3D printer for
prototyping with engineering-grade materials.
If you are tired of the fragility of PLA and the warping of ABS, try our revolutionary material, UltraPA-CF.
By printing your large models with a large-diameter nozzle, you will get an oversized model with a high
strength of 80MPa and heat resistance up to 150°C within days. It is the best choice for your prototype
verification.
Active Heated Chamber | 70℃.
The design employs a double-layer insulation cotton layer, allowing the cavity temperature to be raised to 70°C.
This is crucial for preventing the shrinkage and deformation of large engineering materials.
Reduces Thermal Stress & Warping
Improves Interlayer Bonding
Minimizes Moisture Impact
Ensures Process Consistency
When printing large or high-strength engineering materials (e.g., ABS), uneven cooling causes internal thermal stress,
leading to warping, delamination, or cracking.
Did You Know a Heated Chamber Can Warp Your Printer?
Ln large-format FFF 3D printing, when chamber temperature rises, the printer frame and structural
components also undergo thermal deformation—metal expansion, axis misalignment, and mechanical
part displacement. These micro-distortions accumulate layer by layer, ultimately leading to:
- - Layer Misalignment and Surface Roughness
- - Loss of Dimensional Accuracy
- - Structural Defects in Large Parts
This is why treating chamber temperature as an optional add-on, or claiming it can be retrofitted later,
proves these manufacturers just don't get it. They have no compensation for machine deformation—some
aren’t even aware of the issue. They simply add it as a feature to drive sales, with total disregard for actual
print quality.
With 8+ Years of R&D on the Chamber Temperature of FFF Industrial Printers.
Our Solution: Intelligent Chamber Heating Algorithm
The intelligent chamber heating algorithm predicts and counteracts irregular deformations caused
by chamber temperature variations.
The robust structure of the 3D printer (weight matters) significantly reduces deformation—the heavier
the machine, the less distortion!
Outage Restore & Filament Detection & Backup Mode.
The printer automatically memorizes the current position and saves print data when power is interrupted.
Upon restart, it resumes printing from the exact point of interruption, eliminating the need to restart entire
prints and saving valuable time and material costs.
The printer also prevents failed prints by pausing and alerting you when the filament runs out, allowing
you to replace the spool and continue printing without losing progress.
Backup Mode: If the filament in the main nozzle (No. 1) is exhausted, the printer automatically switches
to the secondary nozzle (No. 2) to continue printing, ensuring uninterrupted production even during
filament changes.
Magnetic Suction Platform
Proprietary magnetic platform, large, easily removable, and heat-resistant over 100°C,
and won’t demagnetize over time.
For oversized models, it is easy to detach them quickly and the bottom of the model is flat.
Convenient to all operators.
True External Air Cooling.
Medical-Grade Cooling Pump
Printer Head Heat Protection
True Air Model Cooling
Ultra-Quiet & Reliable: Equipped with a medical-grade pump, it delivers powerful, constant air pressure
with minimal noise. Engineered for 24/7 operation, it ensures a quiet and stable workflow for professional environments.
Ultra Air Filter System / 99.995% Adsorption.
Our advanced air purification system employs a dual-filter design: an initial HEPA filter captures fine particles,
while an activated carbon filter absorbs volatile organic compounds (VOCs) and odors. This ensures a clean
and safe printing environment, protecting both the operator and the printed parts from harmful emissions.
WIFI, LAN, Internet, APP Control.
In addition to cloud connectivity, CreatBot also supports local area network mode and physical connection operation.
You can control the printer, send sliced files, and update firmware without an internet connection.
Camera Control Technology.
Camera control technology allows customers to control the printing process on speed, pause, temp., etc.,
with an APP remotely, achieving the best printing quality in the shortest time without failure. A very useful
feature for large models and long-time printing.
Specifications:
| Printing | |
| Print Technology | FDM/FFF |
| Build Volume | Single Extrusion: 420 x 400 x 420mm Dual Extrusion: 365 x 400 x 420mm |
| Number of Nozzles | Double |
| Auto Rising Extruders | Yes |
| Layer Resolution | 0.05 mm |
| Filament Diameter | 1.75 mm |
| Filament Compatibility | PLA, ABS, ASA, PP, PETG, PC, Nylon, TPU, ABS-CF, PC-CF, PET-CF, PET-GF, UltraPA-CF, PPS-CF, etc, PPS-CF, etc, PA-GF, PA-CF, PA-ABS, PC-ABS, PP-GF, PP-CF |
| Nozzle Diameter | 0.6mm (0.3, 0.4, 0.6, 0.8,1.0mm) Optional |
| Temperature | |
| Max. Nozzle Temperature | 420 ℃ |
| Max. Bed Temperature | 120 ℃ |
| Hot Chamber Temperature | 70 ℃ |
| Speed | |
| Max Print Speed | 300 mm/s |
| Flow Rate | 90 mm³/s |
| Electrical | |
| Power Requirements | 110~240 V, 50~60 Hz |
| Display | 7 inch touch screen |
| Rated Power | Printer: 2500W |
| File Transfer | USB/U disk / WiFi / LAN |
| Software | |
| Software | CreatWare, Orca Slicer, Cura, Simplify3D,Prusa, etc |
| Supported File Types | Gcode, STL, 3MF, OBJ, AMF, STP, STEP |
| Operating Systems | Windows ALL / Mac OS |
| Special Function | |
| Air filter | HEPA+Carbon |
| Filament Detection | Pause Printing |
| Firmware | Klipper - High Speed |
| Camera Control | Camera Remote Monitoring |
| Bed Leveling Technology | Eddy Current Leveling |
| XY Offset Technology | HD Camera Dual Nozzle Offset |
| Z Offset Technology | Dual Photoelectric Sensor |
| Nozzle Shutter Technology | Dual nozzle shutter |
| Door Opening Detection | Yes |
| External Air Cooling | Yes |
| Mechanical | |
| Build Plate | Aviation Aluminum Plates + Removable magnetic sheet |
| Build Plate Leveling | Automatic |
| Extruder | Smart Dual Extruders |
| Auto-Raising Extruders | Yes |
| X/Y Positioning Precision | 0.00375 mm |
| Z Positioning Precision | 0.00156 mm |
| Size & Weight | |
| Product Dimensions & Weight | 785 x 700 x 985mm 110kg |
| Packing Size & Weight | 830 x 760 x 1090mm 140kg |