The First Layer Defines Print Quality
Equipped with automatic mesh bed leveling, our large-format 3D printers ensure an ultra-smooth
and uniform first layer across the entire expansive platform for flawless printing results.
Auto-Raising Dual Extruders | 420℃
Flow Rate:90 mm³/s
Heating to 400°C:2 Mins
Thermostat Accuracy:±0.15 °C
The D1000 Pro HS features a next-gen smart auto-raising dual-extruder kit, capable of reaching
hotend temperatures up to 420 °C. The hotend can be quickly swapped for different nozzle sizes.
Enhanced with the upgraded Dual Nozzle Shutter technology, it delivers flawless printing with
different support materials. Combined with a topologically optimized lightweight design, the
printhead enables even higher printing speeds and greater motion agility.
Automatic Dual Nozzle Shutter
This innovative system features a precision mechanical shutter that automatically closes over the
nozzle of the idle extruder the moment it lifts away. By creating a physical seal, it effectively
prevents oozing and cross-contamination between materials, ensuring flawless multi-material
and multi-color prints. It's the key to achieving pristine quality and reliability in every layer.
cale Without Limits for High-Strength Prototypes
The CreatBot D1000 Pro HS was created to make industrial 3D printing of large-scale objects and
prototypes as easy as possible. It is embedded with many advanced technologies for ultra-large,
impressive prints. It will undoubtedly be your best choice if you are looking for an industrial
large-scale 3D printer for prototyping with engineering-grade materials.
If you are tired of the fragility of PLA and the warping of ABS, try our revolutionary material,
UltraPA-CF. By printing your large models with a large-diameter nozzle, you will get an oversized
model with a high strength of 80MPa and heat resistance up to 150°C within days. It is the best
choice for your prototype verification.
Case Study: Large-Scale Prototyping with Engineering Materials Faurecia a global leader in automotive systems, utilizes the CreatBot D1000 Pro HS to develop
high-performance seat molds for major OEMs including Audi, VW, Nissan, and GM. A prime
example is the bowl and lid assembly shown here. To withstand 100MPa of pressure, these
parts were printed using Nylon Carbon Fiber at 50% infill. The D1000 Pro HS delivered exceptional
structural integrity, successfully passing Faurecia’s rigorous validation tests.
Active Heated Chamber | 80℃
The design employs a double-layer insulation cotton layer, allowing the cavity temperature to be raised to 80°C.
This is crucial for preventing the shrinkage and deformation of large engineering materials.
Reduces Thermal Stress & Warping
Improves Interlayer Bonding
Minimizes Moisture Impact
Ensures Process Consistency
When printing large or high-strength engineering materials (e.g., ABS), uneven cooling causes internal
thermal stress, leading to warping, delamination, or cracking.
Did You Know a Heated Chamber Can Warp Your Printer?
Ln large-format FFF 3D printing, when chamber temperature rises, the printer frame and structural components
also undergo thermal deformation—metal expansion, axis misalignment, and mechanical part displacement.
These micro-distortions accumulate layer by layer, ultimately leading to:
- Layer Misalignment and Surface Roughness
- Loss of Dimensional Accuracy
- Structural Defects in Large Parts
This is why treating chamber temperature as an optional add-on, or claiming it can be retrofitted later, proves
these manufacturers just don't get it. They have no compensation for machine deformation—some aren’t even
aware of the issue. They simply add it as a feature to drive sales, with total disregard for actual print quality.
With 8+ Years of R&D on the Chamber Temperature of FFF Industrial Printers
Our Solution: The Synergy of Two Patented Technologies—Intelligent Chamber Heating Algorithm
& Z-Axis Magic Box Technology:
Intelligent Heating Algorithm: Predicts and counteracts irregular deformations caused by
chamber temperature variations
Z Axis Magic Box: Maintains flawless surface finish via real-time thermal compensation for
frame and build-plate expansion.
Ultimate Result: Flawless prints produced even when slight machine deformation has already occurred!
Machine Weight Matters: Our robust construction significantly minimizes deformation. The heavier the machine, the less distortion occurs!
4) Die robuste Konstruktion des 3D-Druckers (Gewicht der Maschine zählt) minimiert
Verformung erheblich – je schwerer die Maschine, desto weniger Verzerrung tritt auf!
Safety Door Protection System
Enterprise-Compliant Secure Printing Solution
This safety-certified door monitoring system automatically halts printing operations immediately upon door access
detection, ensuring full compliance with enterprise safety protocols. The industrial-grade interlock mechanism
prevents unauthorized operation exposure, eliminates mechanical hazards, and maintains full process accountability
with encrypted operation logs.
Outage Restore & Filament Detection & Backup Mode
The printer automatically memorizes the current position and saves print data when power is interrupted.
Upon restart, it resumes printing from the exact point of interruption, eliminating the need to restart entire
prints and saving valuable time and material costs.
The printer also prevents failed prints by pausing and alerting you when the filament runs out, allowing
you to replace the spool and continue printing without losing progress.
Backup Mode: If the filament in the main nozzle (No. 1) is exhausted, the printer automatically switches
to the secondary nozzle (No. 2) to continue printing, ensuring uninterrupted production even during
filament changes.
Magnetic Suction Platform
Proprietary magnetic platform, large, easily removable, and heat-resistant over 100°C,
and won’t demagnetize over time. For oversized models, it is easy to detach them quickly
and the bottom of the model is flat. Convenient to all operators.
. Linear Rail and Servo Motors
When it reaches to 1000mm+ length, small rail have big deflection. The D1000 Pro HS uses heavy-duty
linear rails and servo motors to ensure smooth and precise movement even at high speeds without
compromising the precision and reliability required for massive prints..
True External Air Cooling
Medical-Grade Cooling Pump
Print Head Thermal Protection
True Air Model Cooling
Ultra-Quiet & Reliable: Equipped with a medical-grade pump, it delivers powerful, constant air pressure with
minimal noise. Engineered for 24/7 operation, it ensures a quiet and stable workflow for professional environments.
Filament Dry Room
Our 3D printer features an integrated filament drying compartment, which maintains a controllable
temperature environment of 0-70°C. Designed to prevent moisture absorption in hygroscopic
materials such as nylon, PC, PA-CF, PET-CF, It eliminates printing defects like bubbling and
stringing, ensuring consistent, high-quality output throughout the printing process.
Independent Quad-Z Axis
Quad-Z Auto-Leveling
Superior Load Capacity & Stability
Anti-Tilt & Torque Correction
Superior Layer Consistency
Eliminate Manual Leveling for Absolute Flatness: The independent four-motor drive allows for individual
height compensation at each corner of the platform. The system automatically detects and fine-tunes
the vertical height of every corner to ensure extreme parallelism between the build plate and the gantry,
completely solving first-layer adhesion issues for large-scale prints.
Ultra Air Filter System / 99.995% Adsorption
Our advanced air purification system employs a dual-filter design: an initial HEPA filter captures fine particles,
while an activated carbon filter absorbs volatile organic compounds (VOCs) and odors. This ensures a clean
and safe printing environment, protecting both the operator and the printed parts from harmful emissions.
WIFI, LAN, Internet, APP Control
In addition to cloud connectivity, CreatBot also supports local area network mode and physical
connection operation. You can control the printer, send sliced files, and update firmware without
an internet connection.
Camera Control Technology
Camera control technology allows customers to control the printing process on speed, pause, temp., etc., with an APP remotely,
achieving the best printing quality in the shortest time without failure. A very useful feature for large models and long-time printing.
D1000 Pro HS Highlights
1050*1050*1050mm Build Volume
High Resolution & Speed
Camera Control Technology
Reliable 24/7
Fully Enclosed
Exceptional Stability
The precision-engineered steel monocoque construction ensures exceptional machine stability,
minimizing vibration and maintaining consistent print quality even during high-speed, long-duration
printing sessions. This robust design guarantees reliable performance for industrial-scale production.
.
Specifications
Printing
Print Technology
FDM/FFF
Build Volume
Single Extrusion: 1050 x 1050 x 1050mm
Dual Extrusion: 995 x 1050 x 1050mm