Arnite® ID 3040 für FFF-Anwendungen (Fused Filament Fabrication)
kombiniert hohe Wärmebeständigkeit, Dimensionsstabilität und hervorragende Festigkeit mit
ausgezeichnete Verarbeitungseigenschaften.
Es ist eines der wenigen reinen PET-Filamente auf dem heutigen Markt und kann verwendet werden,
von Steckverbindern für weiße Ware bis hin zu Automobilsensoren.
Arnite® ID 3040 bietet Ihnen auch eine gute Schmelz- und Zwischenschichtfestigkeit mit hervorragenden Oberflächenqualitäten.
Teile können leicht beschichtet oder lackiert werden und halten Witterungseinflüssen und Feuchtigkeit gut stand.
Das Beste ist, dass Arnite® ID 3040 nicht nur Ihre Fertigungsleistung steigert.
Dank seiner einfachen Recyclingfähigkeit ist es auch umweltfreundlich.
Mögliche Anwendungen:
Transport - Beleuchtungsrahmen, Bremskraftverstärkerventile, Scheibenwischer
Elektronik - weiße gute Anschlüsse, Nebelscheinwerfergehäuse
General printing guidelines *
Nozzle size: ≥ 0.25mm |
Layer height: > 0.1mm * |
Flow rate: ± 100% |
Print temp: ± 275 - 300° C * |
Print speed: Medium / High * |
Retraction: Depends * |
Heat bed: ± 60 - 120° C * |
Fan speed: 0% |
Printing surface: PEI / PET sheet + DimaFix |
Enclosed printer needed: Preferred |
Heated Build Chamber: Preferred |
Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) First layer : 100 - 150% of first layer thickness.
*) Arnite® ID 3040 can be used with a range of nozzle temperature (265–285 °C / 509–545°F). Preferred temperature to print your object is 270°C / 518°F. To generate a homogeneous melt, the melt temperature should always be above 265°C / 509°F. Optimal mechanical properties will be achieved at melt temperature between (270–280 °C / 518–536°F).
*) Print speed: 50 -100 mm/s (obeying the maximal throughput in cm3/s of the extruder). Print speed for "normal" nozzle size (0.4mm) and layer height (0.2mm), for other values print speed should be adjusted accordingly!
*) Do only remove printed object from print bed when print bed has cooled down to ambient temperatures, as otherwise printed part can deform severely.
*) Retraction dependent on printer type and filament diameter
Filament length
ρ: 1.34 g/cc |
50 gr coil |
0.5 Kg spool |
|
|
|
Ø 1.75mm |
± 15.5m |
± 155m |
|
|
|
Ø 2.85mm |
± 5.8m |
± 58m |
|
|
|
Product export information
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.